BDS 6" (15 cm) Suspension Lift Kit

BDS Suspension 6" 2013 - 2015 Dodge Ram 1500 4WD Gas/Eco-Diesel 1/2 Ton Pickup.

For 2013 Dodge added an electronic steering rack which uses different tie rod ends. BDS has you covered with a new 6" lift kit specifically developed for your Dodge 1500 truck.

This 6" lift kit is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance and on road appeal.

The replacement steering knuckles make for a clean installation as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.

The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines.

Due to the OE ride height variances, BDS allows you to customize your desired stance by offering both 3" or 5" rear Pro-Ride coils that are capable of being smashed totally flat and will come back to normal ride height. The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets, and sway bar links.

Rear 5500 series hydraulic shock absorbers are included with BDS by Fox 2.0 series gas shocks available as an upgrade.

Additional (Customize this kit):

These vehicles vary from 1" to 3" tail high from the factory. We offer both a 3" rear kit as well as a 5" rear kit. Be sure to measure your vehicle and order the appropriate rear lift height to level your truck. You can also choose between the custom valved BDS 5500 hydraulic series or the BDS by Fox 2.0 series gas charged monotube rear shocks.

3" Lift 5500 Shocks (included to base kit) If your vehicle is 3" tail high from the factory then this is the appropriate selection to level your vehicle. This selection includes BDS 5500 series rear shocks.
Upgrade to 3" Lift Fox 2.0 Shocks for $151
Upgrade to 5" Lift 5500 Shocks for $52 If your vehicle is level to 1" of tail high stance then this is the appropriate selection. This selection includes BDS 5500 series shocks.
Upgrade to 5" Lift Fox 2.0 Shocks for $204 If your vehicle is level to 1" of tail high stance then this is the appropriate selection. This selection includes BDS by Fox 2.0 series shocks.
Add Shock Boots for $2.88 Shock boots protect the shock shaft and seal from dirt & debris while adding color to your vehicle's undercarriage. These are packaged boots and include shock ties. Available boots colors: Black, Blue, Red, Yellow

Tire & Wheel Combinations
37" x 12.50" w/17 x 9 and 4-1/2" back spacing
37" x 12.50" w/18 or 20 x 9 and 5" back spacing
Est. Installation: 10 hours
Difficulty Level (easy 1 - 5 complicated): 4

Important Kit Notes

1. The rack and pinion steering system is extremely sensative to an out-of -round or out-of-balance tire/wheel combination. The larger the tire and the less the backspacing, the more sensative the system becomes, causing minor steering wheel shimmy.
2. Not recommended for AWD models.
3. Stock 17" wheels can not be re-installed. Stock 20" can be reinstalled with factory tire.
4. Will not fit adjustable air suspension equipped models
5. TRX models will achieve approximately 1" of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for about 5" of lift or replace the TRX struts with standard struts for use with this system.