BDS 7"(17,78 cm) Suspension Lift Kit

BDS Suspension 7"(17,78 cm) lift kit for the 2007 - 2015 Toyota Tundra 2WD & 4WD Pickups

Front (base kit): 7" IFS System
Rear (base kit): 4" Block Kit

This complete 7" IFS w/ strut mount lift kit system is not only built for daily driving, but will handle about any off road excursion you can think of. The heavy duty main crossmembers are locked together by a full belly pan that offers superior off road protection.

Included with this IFS lift kit are CNC machined steering knuckles which ensure a clean and simple install. The lift is achieved with lower strut mounts and a stuft preload spacer. Rear 5500 series hydraulic shock absorbers are included with Fox 2.0 series gas shocks available as an upgrade for this 7"(17,78 cm) Toyota Tundra lift kit.

Additional (Customize this kit)

Upgrade to Fox 2.0 series gas monotube shocks for increased control and performance for $151 Fox 2.0 performance series shocks have been tuned and tested by both Fox and BDS Suspension to maximize performance specific to each application and to every BDS Suspension system. The basic shock design is based on proven Fox Racing Shox race products, but re-designed to maximize the ride quality, handling, and control of your BDS equipped truck or jeep, whether on or off the road.
Add Shock Boot for $2.88> Shock boots protect the shock shaft and seal from dirt & debris while adding color to your vehicle's undercarriage. These are packaged boots and include shock ties. Available Shock boot colors: Black, Blue, Red, Yellow
Add Carrier Bearing Drop Kit for $14
Add Rear 1" Shackle Kit $153 Rear 1" lift shackles are a perfect answer to help get the stance you desire from your truck.

Tire & Wheel Combinations
35 x 12.50 w/18x9 and 5-1/2" back spacing
35 x 12.50 w/20x9 and 5-1/2" back spacing
37 x 12.50 w/20x9 and 6-1/4" back spacing
Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 3

Important Kit Notes

1. Requires frame bracket modification and welding.
2. Strut compressor required for installation.
4. Stock 17", 18", and 20" wheels cannot be reinstalled.
5. Models with two piece rear driveline will require rear driveline modification.
6. Rear shackle kit can be added for 1" additional lif
7. ***Will NOT work with Bilstein (yellow) factory front struts on 2014 models.***
8. Models equipped with 6 piston calipers require modification.