SPECIAL offer

Make:
Audi
Model:
Q7
Year:
2015 г.
Odometer:
0 км

BDS 4-1/2" (11.43) Suspension Lift Kit

BDS 4-1/2" (11.43) Suspension Lift Kit

Price:

2 010

BDS Suspension 4-1/2" (11.43 cm) lift kit for the 2007 - 2015 Toyota Tundra 2WD & 4WD

This complete 4-1/2" IFS w/ strut mount lift kit system is not only built for daily driving, but will handle about any off road excursion you can think of. The heavy duty main crossmembers are locked together by a full belly pan that offers superior off road protection.

Included with this IFS lift kit are CNC machined steering knuckles which ensure a clean and simple install that is made easier by the lower strut mounts that don't require you to disassemble the strut. Rear 5500 series hydraulic shock absorbers are included with 9500 series gas shocks available as an upgrade for this 4-1/2" Toyota Tundra lift kit.

Additional (Customize you kit):

Upgrade to Fox 2.0 series gas monotube shocks for increased control and performance for $151.58
Fox 2.0 performance series shocks have been tuned and tested by both Fox and BDS Suspension to maximize performance specific to each application and to every BDS Suspension system. The basic shock design is based on proven Fox Racing Shox race products, but re-designed to maximize the ride quality, handling, and control of your BDS equipped truck or jeep, whether on or off the road.
Add Carrier Bearing Drop Kit for $14
Add Rear 1" Shackle Kit for $153
Add Shock Boots for $2.88
Shock boots protect the shock shaft and seal from dirt & debris while adding color to your vehicle's undercarriage. These are packaged boots and include shock ties.
Available boots colors: Black, Blue, Red, Yellow

Tire & Wheel Combinations
35 x 12.50 w/18x9 and 5-1/2 back spacing
35 x 12.50 w/20x9 and 5-1/2 - 6.25" back spacing
Est. Installation: 8 hours
Difficulty Level (easy 1 - 5 complicated): 3

Important Kit Notes

1. Requires frame bracket modification and welding.
2. No strut dissassembly required.
3. Stock 18" wheels can not be installed. factory 20" wheels with more than 6.25" backspacing can not be installed.
4. Models with two piece rear drive line would require rear drive shaft modification.
5. When kit is installed on 2WD models, the differential brackets will not be used.
6. ***Will NOT work with Bilstein (yellow) factory front struts on 2014 models.***
7. Models equipped with 6 piston calipers require modification.